Analysis On Maintenance Methods Of Water Filter

● Coarse filter
1. The core part of the filter is the filter core. The filter core is composed of the filter frame and stainless steel wire mesh. The stainless steel wire mesh is a vulnerable part and requires special protection.
2. After the water treatment filter has been working for a period of time, a certain amount of impurities will precipitate in the filter core. At this time, the pressure drop will increase and the flow rate will decrease. The impurities in the filter core need to be removed in time.
3. When cleaning impurities, pay special attention to the fact that the stainless steel wire mesh on the filter element cannot be deformed or damaged. Otherwise, if the filter is installed, the purity of the filtered medium will not meet the design requirements, and compressors, pumps, instruments and other equipment will be damaged. to destruction.
4. If the stainless steel wire mesh is found to be deformed or damaged, it must be replaced immediately.
● Precision filter
1. The core part of the precision filter is the filter element. The filter element is made of special materials and is a vulnerable part that requires special protection.
2. After the precision filter has been working for a period of time, the filter element traps a certain amount of impurities. At this time, the pressure drop increases and the flow rate will decrease. The impurities in the filter need to be removed in time, and the filter element needs to be cleaned at the same time.
3. When removing impurities, pay special attention to the precision filter element, which must not be deformed or damaged. Otherwise, the purity of the filtered medium after installation of the filter element will not meet the design requirements.
4. If the filter element is found to be deformed or damaged, it must be replaced immediately.