Installation of countertop and undercounter water purifiers

(1) Reasonably arrange the length of the PE pipe according to the number of water inlets and outlets. For RO reverse osmosis water purifiers, you need to open the machine first, install the RO membrane into the corresponding membrane shell, and tighten it to prevent leakage. For ultrafiltration water purifiers Ignore this step.
(2) Turn off the main switch of the water pipe, unscrew the faucet, wrap the faucet diverter fitting provided in the machine with raw tape, and then install the faucet. Connect the PE pipe to the diverter port.
(3) Remove the plugs from the water outlet, water inlet, pressure barrel port and sewage outlet on the water purifier, and connect the PE pipes to the corresponding accessories respectively. Plan the length of the PE pipe so that the water from the sewage outlet can be directed into a bucket for secondary use.
(4) Power on and test. If there is water leakage, the interface is not connected properly. Just reconnect the interface.