How to clean household reverse osmosis pure water machines?

1. Cut off the power supply to the water dispenser.
2. Clean the surface, trays and other parts. Use neutral detergent to clean the surface, but do not use organic cleaning agents, otherwise it will corrode the surface of the water dispenser. You can use alcohol cotton balls to clean the water inlet, inner wall, faucet, water tray, etc.; insert the water bottle vertically downward into the smart seat on the upper part of the machine, open the red hot water faucet and the blue cold water faucet until water is released, then close the faucet, and then Hold the bottle with both hands and lift it out.
3. Clean the outside of the water dispenser and smart seat.
4. Pour an appropriate amount of special cleaning and disinfectant into the water storage tank. After soaking for 10 minutes, turn on the red and blue faucets until the disinfectant is finished.
5. Unscrew the water drain valve at the back or bottom of the machine to drain the disinfectant in the water dispenser.
6. Rinse several times with boiling water or bottled water.
7. Tighten the water drain valve and the disinfection and sterilization procedure is completed.