Sediment Water Filters Replacement Cartridges

PP Melt Blown Depth water filter Cartridges is a unique depth filters produced with pure Polypropylene resin, which meets the requirement of the FDA Title 21 of the Code of Federal Regulations 177.1520 for direct and indirect food contact. Melt Blown Depth Filter Cartridges take advantage of our innovated continuous multi-extruded technology and the latest melt blowing micro-fiber technology.

The Melt blown micro-fiber is self-bonded and formed a 3D pore structure. Diameter and density of micro-fiber can be varying from inner to outer of the filter diameter. Melt Blown Depth water filter Cartridges is designed to have continuously graded pore structure provide both pre-filtration and final-filtration.

If you want to know about Sediment Water Filters Replacement Cartridges,Please Click

FEATURES & BENEFITS	High contaminant holding capacity Longer life service Low pressure drop Micro straining melt-blown filtration fiber, high removal rating
	Strong Construction PP series cartridges, self-bonded with no chemical binder. Multi-Layer structure (fibers fineness varying from inner to outer of the filter.)  Cartridges structure and progressively loose from inside to outside, so the cartridges contaminant catching capacity increased and the lifetime is prolonged.
	PP Series Safety F.D.A compliant hemical resistance: 100% polypropylene for compatibility with a wide range of process fluids, and good chemical resistance acidc.
APPLICATIONS	Commercial	Pre-filter of drinking water treatment system Pre-filter of reverse osmosis system and others water filter system
	Industry	Oil removal industry Food and beverages industry Photographic industry Pharmacy industry Electroplating, etching and image development processes in PCB industry. Filtration of electroplating fluid in conventional electroplating industry. Pre-filter of DI & RO water filtration system for industry. Filtration of media & low viscosity fluids of chemical. Filtration of water for manufacturing processes and recycled water.
OPERATION CONDITIONS	Maximum Operation Pressure Drop	21°C=5.0Kg/cm2
MATERIALS		100% polypropylene, melt-blown thermal bond fiber.
SPECIFICATIONS		nominal 1, 5, 10, 20, 30, 50, 75, 100 micron
SPECIFICATION		Inner diameter : 28mm,30mm;Outer diameter : 40mm~115mm;Length : 125mm~1270mm
FLOW CHART >